Open 24 hours, all 7 days Kothapet, Hyderabad · Serving Hyderabad & Secunderabad 97017 13554

Borewell Drilling Services in Hyderabad

Everything needed to take a plot from dry ground to a working borewell: point selection, drilling, casing, flushing and pump fitting.

6.5 inch borewell drilling

The standard size for apartments, commercial buildings and farms that need a higher-capacity pump. Our rigs drill 6.5 inch bores to depths of up to 2,000 feet.

Suited to apartment blocks, commercial complexes, institutions, industries and agricultural land. The wider bore accepts higher-capacity submersible pumps, which matters when many flats or a large area depend on one borewell.

4.5 inch borewell drilling

A compact bore for independent houses and tight plots where a smaller rig set-up is needed. Drilling capacity up to 1,000 feet.

Suited to independent houses, duplexes and small plots. The smaller rig set-up is easier to position in narrow lanes and inside compound walls, and the bore takes the pump sizes normally used for a single home.

Groundwater survey & point marking

Before the rig arrives we help you choose the drilling point, so the bore is placed where the chance of striking water is best and the rig can work safely.

Choosing the point is the most important decision in the whole job. We look at the plot, existing bores nearby and rig access, and where a geologist's survey is worthwhile we tell you so before drilling.

Casing pipe installation

Casing is fitted through the loose top soil down to hard rock, which keeps the bore from collapsing and stops surface water from entering it.

The loose soil and weathered rock near the surface must be cased, or the bore can cave in and muddy water can enter. We fix casing down to hard rock and measure the casing length with you on site.

Submersible pump & motor fitting

Once the bore is drilled and flushed, we can supply and lower the submersible pump, cable and pipes so the borewell is ready to use.

After drilling we can lower the submersible pump with the right cable, pipe and starter for the depth and yield of your bore, so that you are not left arranging a second contractor.

Yield check & flushing

Every new bore is flushed with compressed air and the water yield is checked on site before we hand it over.

Compressed air is used to blow out cuttings and clean the bore. We then check the yield on site and record the total depth and casing length for your records.

Who we drill for

  • Independent house owners and plot owners
  • Apartment associations and gated communities
  • Builders and real estate projects
  • Hotels, resorts, schools and hospitals
  • Industries, warehouses and commercial buildings
  • Farms and agricultural land

How a job runs

  1. 1

    Call or WhatsApp

    Share your location and plot details. We give you the current per-foot rate and the earliest available slot.

  2. 2

    Site visit & point marking

    We check rig access, overhead lines and the best drilling point on your plot.

  3. 3

    Drilling

    The rig drills through soil and rock. You can watch the depth and the water strike as the work goes on.

  4. 4

    Casing & flushing

    Casing pipe is fixed to hard rock and the bore is flushed clean with compressed air.

  5. 5

    Yield check & handover

    We check the water yield, record the final depth and casing length, and advise on the right pump.

Amarapali Drillers borewell rig ready for drilling

Get a free borewell quote

Tell us your area and we will call you back with today’s per-foot rate.

    Need a borewell drilled in Hyderabad or Secunderabad?

    Call or WhatsApp us with your location. We will share today’s per-foot rate and the earliest slot.