6.5 inch borewell drilling
The standard size for apartments, commercial buildings and farms that need a higher-capacity pump. Our rigs drill 6.5 inch bores to depths of up to 2,000 feet.
4.5 inch and 6.5 inch borewell drilling in Beeramguda, West Hyderabad & IT Corridor. Call for today’s per-foot rate.
Beeramguda has grown fast over the last few years, with new layouts, gated communities and independent houses coming up on plot after plot. Amarapali Drillers drills new borewells in Beeramguda for house construction, apartments and open plots.
We drill both 4.5 inch and 6.5 inch borewells, with rigs that reach up to 1,000 feet and 2,000 feet respectively. Our yard is in Kothapet, and we take up work across Beeramguda and neighbouring Ameenpur, Ramachandrapuram and Patancheru.
The standard size for apartments, commercial buildings and farms that need a higher-capacity pump. Our rigs drill 6.5 inch bores to depths of up to 2,000 feet.
A compact bore for independent houses and tight plots where a smaller rig set-up is needed. Drilling capacity up to 1,000 feet.
Before the rig arrives we help you choose the drilling point, so the bore is placed where the chance of striking water is best and the rig can work safely.
Casing is fitted through the loose top soil down to hard rock, which keeps the bore from collapsing and stops surface water from entering it.
Once the bore is drilled and flushed, we can supply and lower the submersible pump, cable and pipes so the borewell is ready to use.
Every new bore is flushed with compressed air and the water yield is checked on site before we hand it over.
On a new plot in Beeramguda it is easiest to drill before construction starts, while the rig can still drive in and position freely. Water is then available for curing and construction work from day one.
For apartment projects and gated layouts in Beeramguda we usually recommend a 6.5 inch bore, and more than one bore where the demand is high. We can drill several points in one visit.
Hyderabad sits on hard granite rock, and groundwater is found in the cracks and fractures within it. That is why the depth at which water is struck can differ a lot even between neighbouring plots in Beeramguda. Nobody can honestly promise an exact depth or yield in advance; a survey and local experience improve the odds.
New borewells in Telangana are regulated under the WALTA Act, and permission from the local revenue or municipal authority may be required before drilling in Beeramguda. We can tell you what is usually asked for when you call.
Drilling is charged per foot. The final cost depends on the total depth, the bore size (4.5 inch or 6.5 inch), the length of casing pipe and how easily the rig can reach your plot in Beeramguda. Call 97017 13554 for the current rate.
Tell us your area and we will call you back with today’s per-foot rate.
Share your location and plot details. We give you the current per-foot rate and the earliest available slot.
We check rig access, overhead lines and the best drilling point on your plot.
The rig drills through soil and rock. You can watch the depth and the water strike as the work goes on.
Casing pipe is fixed to hard rock and the bore is flushed clean with compressed air.
We check the water yield, record the final depth and casing length, and advise on the right pump.
Borewell drilling in Beeramguda is charged per foot, and the rate changes with depth slabs, bore size (4.5 inch or 6.5 inch) and the length of casing pipe needed. Call 97017 13554 for today's per-foot rate and an estimate for your plot.
It varies from plot to plot because water in Hyderabad's granite rock is found in fractures. Our rigs can drill up to 1,000 feet in 4.5 inch and up to 2,000 feet in 6.5 inch, and we stop when a workable yield is reached or when you ask us to.
A 4.5 inch bore suits most independent houses and tight plots. A 6.5 inch bore allows a higher-capacity pump and is the usual choice for apartments, commercial buildings and farms. We advise after seeing the plot and your water requirement.
Yes. Along with Beeramguda we regularly take up borewell drilling in Ameenpur, Ramachandrapuram and Patancheru and the rest of Hyderabad and Secunderabad.
Alkapuri Ameenpur Chanda Nagar Financial District Gachibowli Gandipet Gopanapalli Gowlidoddi Hitech City Khajaguda Kokapet Kollur Kondapur Lingampally Madhapur Manikonda Mokila Nallagandla Nanakramguda Narsingi Patancheru Puppalaguda Raidurg Ramachandrapuram Serilingampally Shankarpally TNGOS Colony Tellapur
Call or WhatsApp us with your location. We will share today’s per-foot rate and the earliest slot.