Open 24 hours, all 7 days Kothapet, Hyderabad · Serving Hyderabad & Secunderabad 97017 13554

Borewell drilling in Mallapur

4.5 inch and 6.5 inch borewell drilling in Mallapur, East Hyderabad. Call for today’s per-foot rate.

Borewell drilling in Mallapur

Mallapur combines industrial units, warehouses and workers' colonies with a growing number of residential streets. Amarapali Drillers drills borewells in Mallapur for factories, godowns, commercial buildings and homes.

We drill both 4.5 inch and 6.5 inch borewells, with rigs that reach up to 1,000 feet and 2,000 feet respectively. Our yard is in Kothapet, and we take up work across Mallapur and neighbouring Nacharam, Moula Ali and Kapra.

  • 4.5 inch borewells up to 1,000 feet
  • 6.5 inch borewells up to 2,000 feet
  • Domestic, apartment, commercial, industrial and agricultural bores
  • Open 24 hours – call or WhatsApp any time
Borewell drilling rig working in Mallapur, Hyderabad

Borewell services in Mallapur

6.5 inch borewell drilling

The standard size for apartments, commercial buildings and farms that need a higher-capacity pump. Our rigs drill 6.5 inch bores to depths of up to 2,000 feet.

4.5 inch borewell drilling

A compact bore for independent houses and tight plots where a smaller rig set-up is needed. Drilling capacity up to 1,000 feet.

Groundwater survey & point marking

Before the rig arrives we help you choose the drilling point, so the bore is placed where the chance of striking water is best and the rig can work safely.

Casing pipe installation

Casing is fitted through the loose top soil down to hard rock, which keeps the bore from collapsing and stops surface water from entering it.

Submersible pump & motor fitting

Once the bore is drilled and flushed, we can supply and lower the submersible pump, cable and pipes so the borewell is ready to use.

Yield check & flushing

Every new bore is flushed with compressed air and the water yield is checked on site before we hand it over.

Drilling a borewell in Mallapur: what to know

Industrial and commercial supply

Factories, godowns and commercial buildings in Mallapur usually need a 6.5 inch bore sized for continuous pumping. We work around your shift timings and vehicle movement inside the premises.

Homes and colonies nearby

We also drill 4.5 inch and 6.5 inch bores for the houses and apartments around the industrial area of Mallapur, with the rig size chosen to suit the lane and plot.

Rock and depth

Hyderabad sits on hard granite rock, and groundwater is found in the cracks and fractures within it. That is why the depth at which water is struck can differ a lot even between neighbouring plots in Mallapur. Nobody can honestly promise an exact depth or yield in advance; a survey and local experience improve the odds.

Permissions

New borewells in Telangana are regulated under the WALTA Act, and permission from the local revenue or municipal authority may be required before drilling in Mallapur. We can tell you what is usually asked for when you call.

Borewell cost in Mallapur

Drilling is charged per foot. The final cost depends on the total depth, the bore size (4.5 inch or 6.5 inch), the length of casing pipe and how easily the rig can reach your plot in Mallapur. Call 97017 13554 for the current rate.

Get a borewell quote for Mallapur

Tell us your area and we will call you back with today’s per-foot rate.

    How we work

    1. 1

      Call or WhatsApp

      Share your location and plot details. We give you the current per-foot rate and the earliest available slot.

    2. 2

      Site visit & point marking

      We check rig access, overhead lines and the best drilling point on your plot.

    3. 3

      Drilling

      The rig drills through soil and rock. You can watch the depth and the water strike as the work goes on.

    4. 4

      Casing & flushing

      Casing pipe is fixed to hard rock and the bore is flushed clean with compressed air.

    5. 5

      Yield check & handover

      We check the water yield, record the final depth and casing length, and advise on the right pump.

    Borewell drilling in Mallapur: FAQs

    What does borewell drilling cost in Mallapur?

    Borewell drilling in Mallapur is charged per foot, and the rate changes with depth slabs, bore size (4.5 inch or 6.5 inch) and the length of casing pipe needed. Call 97017 13554 for today's per-foot rate and an estimate for your plot.

    How deep do you have to drill for water in Mallapur?

    It varies from plot to plot because water in Hyderabad's granite rock is found in fractures. Our rigs can drill up to 1,000 feet in 4.5 inch and up to 2,000 feet in 6.5 inch, and we stop when a workable yield is reached or when you ask us to.

    How long does it take to drill a borewell in Mallapur?

    Most domestic borewells are drilled, cased and flushed within a day once the rig is on site. Very deep bores or difficult rock can take longer. We give you a realistic time when we see the plot.

    Do you also drill borewells near Mallapur?

    Yes. Along with Mallapur we regularly take up borewell drilling in Nacharam, Moula Ali and Kapra and the rest of Hyderabad and Secunderabad.

    Need a borewell drilled in Hyderabad or Secunderabad?

    Call or WhatsApp us with your location. We will share today’s per-foot rate and the earliest slot.