Open 24 hours, all 7 days Kothapet, Hyderabad · Serving Hyderabad & Secunderabad 97017 13554

Borewell drilling in Kollur

4.5 inch and 6.5 inch borewell drilling in Kollur, West Hyderabad & IT Corridor. Call for today’s per-foot rate.

Borewell drilling in Kollur

Kollur sits on the outer edge of the city, where villa projects, farmhouses, open plots and agricultural land have little or no piped supply. Amarapali Drillers drills borewells in Kollur for villas, farm land, layouts and institutions.

We drill both 4.5 inch and 6.5 inch borewells, with rigs that reach up to 1,000 feet and 2,000 feet respectively. Our yard is in Kothapet, and we take up work across Kollur and neighbouring Tellapur, Mokila and Patancheru.

  • 4.5 inch borewells up to 1,000 feet
  • 6.5 inch borewells up to 2,000 feet
  • Domestic, apartment, commercial, industrial and agricultural bores
  • Open 24 hours – call or WhatsApp any time
Borewell drilling rig working in Kollur, Hyderabad

Borewell services in Kollur

6.5 inch borewell drilling

The standard size for apartments, commercial buildings and farms that need a higher-capacity pump. Our rigs drill 6.5 inch bores to depths of up to 2,000 feet.

4.5 inch borewell drilling

A compact bore for independent houses and tight plots where a smaller rig set-up is needed. Drilling capacity up to 1,000 feet.

Groundwater survey & point marking

Before the rig arrives we help you choose the drilling point, so the bore is placed where the chance of striking water is best and the rig can work safely.

Casing pipe installation

Casing is fitted through the loose top soil down to hard rock, which keeps the bore from collapsing and stops surface water from entering it.

Submersible pump & motor fitting

Once the bore is drilled and flushed, we can supply and lower the submersible pump, cable and pipes so the borewell is ready to use.

Yield check & flushing

Every new bore is flushed with compressed air and the water yield is checked on site before we hand it over.

Drilling a borewell in Kollur: what to know

Farm, villa and open-land borewells

Larger plots in Kollur give more freedom to choose the drilling point, and a groundwater survey is well worth doing before drilling on open land. We drill for farmhouses, agriculture, villa projects and institutions.

Higher-yield bores for irrigation

For irrigation and landscaping in Kollur, a 6.5 inch bore lets you fit a higher-capacity pump. We can also drill more than one point on the same land in a single mobilisation.

Rock and depth

Hyderabad sits on hard granite rock, and groundwater is found in the cracks and fractures within it. That is why the depth at which water is struck can differ a lot even between neighbouring plots in Kollur. Nobody can honestly promise an exact depth or yield in advance; a survey and local experience improve the odds.

Permissions

New borewells in Telangana are regulated under the WALTA Act, and permission from the local revenue or municipal authority may be required before drilling in Kollur. We can tell you what is usually asked for when you call.

Borewell cost in Kollur

Drilling is charged per foot. The final cost depends on the total depth, the bore size (4.5 inch or 6.5 inch), the length of casing pipe and how easily the rig can reach your plot in Kollur. Call 97017 13554 for the current rate.

Get a borewell quote for Kollur

Tell us your area and we will call you back with today’s per-foot rate.

    How we work

    1. 1

      Call or WhatsApp

      Share your location and plot details. We give you the current per-foot rate and the earliest available slot.

    2. 2

      Site visit & point marking

      We check rig access, overhead lines and the best drilling point on your plot.

    3. 3

      Drilling

      The rig drills through soil and rock. You can watch the depth and the water strike as the work goes on.

    4. 4

      Casing & flushing

      Casing pipe is fixed to hard rock and the bore is flushed clean with compressed air.

    5. 5

      Yield check & handover

      We check the water yield, record the final depth and casing length, and advise on the right pump.

    Borewell drilling in Kollur: FAQs

    What does borewell drilling cost in Kollur?

    Borewell drilling in Kollur is charged per foot, and the rate changes with depth slabs, bore size (4.5 inch or 6.5 inch) and the length of casing pipe needed. Call 97017 13554 for today's per-foot rate and an estimate for your plot.

    How deep do you have to drill for water in Kollur?

    It varies from plot to plot because water in Hyderabad's granite rock is found in fractures. Our rigs can drill up to 1,000 feet in 4.5 inch and up to 2,000 feet in 6.5 inch, and we stop when a workable yield is reached or when you ask us to.

    Can a rig reach my plot in Kollur?

    Send us the location and a photo of the approach road on WhatsApp. We check the lane width, gate, overhead cables and turning space, and tell you which rig set-up will work before fixing a date.

    Do you also drill borewells near Kollur?

    Yes. Along with Kollur we regularly take up borewell drilling in Tellapur, Mokila and Patancheru and the rest of Hyderabad and Secunderabad.

    Need a borewell drilled in Hyderabad or Secunderabad?

    Call or WhatsApp us with your location. We will share today’s per-foot rate and the earliest slot.