Open 24 hours, all 7 days Kothapet, Hyderabad · Serving Hyderabad & Secunderabad 97017 13554

Borewell Drilling for Apartments in Kondapur, Gachibowli and Madhapur

· Amarapali Drillers

Borewell Drilling for Apartments in Kondapur, Gachibowli and Madhapur - Amarapali Drillers, Hyderabad

Apartment associations in the western part of the city call us mostly for one reason: the building’s water need has grown and the existing sources are not keeping up. If your committee is discussing borewell drilling in Gachibowli or the localities around it, this guide covers the practical side of drilling inside a working apartment complex.

The kind of locality this is

Kondapur, Gachibowli, Madhapur and Hitech City form the city’s IT corridor. The built form is dense: large gated communities, mid-sized apartment blocks, standalone buildings on smaller plots, hostels, offices and commercial complexes, often side by side. Many people live on each plot, so the daily water need of one building is large, and many buildings rely on tankers for part of the year.

None of this tells you what a new bore will give. The corridor sits on the same hard granite as the rest of Hyderabad. Water is found in weathered rock and fractures, and two bores in the same compound can behave differently. A new bore is worth trying for many buildings, but it is an attempt and not an assured supply.

Why apartments usually choose 6.5 inch

A block of flats needs a pump that can lift a lot of water every day. A 6.5 inch bore accepts larger pumps than a 4.5 inch bore, and our 6.5 inch rig can drill up to 2,000 feet where the association decides to go deep. For a small standalone building with only a few flats, a 4.5 inch bore may still be enough. The right choice depends on the number of users, which is the first thing we ask when someone enquires about borewell drilling in Kondapur.

Finding a workable point inside the compound

In an apartment complex the difficult part is often not the rock but the site. A rig is a tall, heavy lorry and needs open sky above the drilling point. It cannot work inside a cellar or under a podium slab. That leaves the open setbacks, the driveway and any open ground within the compound.

Before choosing a point, the committee should collect the following:

  • The building’s services drawing, showing the sump, sewage lines, treatment plant, electrical cables and fire lines below ground
  • The position of the existing bores, working or not
  • The gate width and turning space for a lorry
  • Any overhead cables or tree branches above the proposed point
  • A route for drilling slurry to drain without flooding the cellar ramp

Buried pipes and cables are the real risk. In older blocks the drawing may be missing, and then the maintenance staff who know where things were dug are the best guide. On tight plots, which are common with borewell drilling in Madhapur, there may be only one or two spots where the rig can stand at all. We help mark a practical point, but we need this information from you to do it safely.

Getting the association ready

Drilling is noisy and dusty for the hours it lasts, and it happens in a shared space. A little preparation avoids arguments.

  1. Take a clear decision in the association, including the bore size and a budget depth.
  2. Check with the local authority whether permission is needed under WALTA for the new bore, and apply in the association’s name if required.
  3. Name one person who will be at the site and has the authority to say stop or continue.
  4. Inform residents of the date, and have cars moved away from the drilling area.
  5. Agree with the driller on timings that suit the complex.

The budget depth is important. With many owners sharing the cost, nobody should have to make a hurried phone round while the rig is running. Decide beforehand how far the association is willing to go.

After the bore is drilled

Once drilling ends, the bore is flushed and the yield is checked. Only then should the pump be chosen, because the pump must match what the bore can actually give. The water is then connected to the sump. We do pump and motor fitting as well, as listed on our services page.

Offices and mixed-use buildings follow the same steps, and we get similar enquiries for borewell drilling in Hitech City. In every case, treat the bore as one source among several and keep your other supply arrangements in place.

If your association wants to discuss a new bore, call Amarapali Drillers on 97017 13554 or message us on WhatsApp for today’s per-foot rate. Committee members can also write to us from the contact page.

Planning a borewell?

Call or WhatsApp Amarapali Drillers for today’s per-foot rate anywhere in Hyderabad and Secunderabad.

Get a free borewell quote

Tell us your area and we will call you back with today’s per-foot rate.

    Need a borewell drilled in Hyderabad or Secunderabad?

    Call or WhatsApp us with your location. We will share today’s per-foot rate and the earliest slot.